How to Replace Your Ford Expedition Tail Light

!±8± How to Replace Your Ford Expedition Tail Light

The Ford Expedition is a full size SUV (Sport Utility Vehicle) which was built by Ford Motor Company and introduced in the market in 1997 as a replacement to the earlier model - Ford Bronco. The Ford Expedition is Ford's flagship SUV. The current third generation models of these vehicles are produced in Kentucky from its earlier base at Michigan.

The Ford Expedition, just like any other vehicles, need proper maintenance in order to realize its full capacity.

Some of the most important parts that need apposite care include the exterior and the rare lights of the vehicle. Ford Expedition is therefore no exception to this maintenance and care. Tail lights (Rear lights) of Ford Expedition are of outmost importance and every driver of the vehicle should make sure they function all properly all the time.

Replacing the tail lights in Ford Expedition is often regarded as a tasking job and many a times, people seek expertise assistance. However, this can be made simple by following the below simple guide. With practice, it is likely that one can become an expert in tail light replacement on all Ford Expedition vehicles.

The tail light is located in the same place of the vehicle rear, one just below the other in the Ford Expedition. The only tools required here are either a T - 20 torx or a 9/32 socket. The first step is to open the entire lift gate, not just the glass to expose the lamp assemblies. There, you will see two or even three Phillip screws holding the tail lamp/lens assembly in place. Unscrew them and set them aside.

Carefully pop the lens off and to the light. There are normally three "push ins" that hold the lens. It may feel like more bolts, but if you pull evenly and diagonally away from the vehicle, they will pop out just fine. There are normally two light bulbs in the assembly on all Ford Expedition.

The top one is the brake light/ turn signal bulb and the other one is the back-up bulb. Normally, there are two groups of wires once you get the light out. These wires are the light bubs and they come out by turning counter-clockwise and then pulling up on them. Get rid of all the remnants of the lens out.

Once the area is clean, pop in the bulb in the new lens and turns it clockwise to snap it into place. Secure the two screws which had been set aside. The Ford Expedition auto parts stores recommend a 4157LL rather than the Sylvania 4157K and this works out perfectly.

This process should take you at least ten minutes and you are ready to bring back your ford Expeditions to the road. It is always advisable to replace the tail lamps as soon as they get broken. This will of course avoid facing the wrath of law enforcers as well as for safety purposes. This process should therefore be considered easy to learn by every Ford Expeditions driver.

How to Replace Your Ford Expedition Tail Light

Shop For Hoover Electric Broom Low Price Coach Peyton Handbag

HID Light Bulbs - How Do They Work?

!±8± HID Light Bulbs - How Do They Work?

HID light bulbs are High Intensity Discharge bulbs that are used by those people who need brighter light when they are driving. As you must be aware, the headlights of most of the vehicles are halogen lights and these lights are not as bright as the HID lights. You will also see these lights in gyms, theme parks, ball games and stadiums.

Many people are now buying the HID or High Intensity Discharge light bulbs because these bulbs are very effective in producing extremely bright lights. What's more, these bulbs can also cover very large areas. You may not be aware but these lights are available in various versions such as the regular high-pressure sodium lights, metal halide lamps and mercury vapor lamps.

The first HID or high definition lamps that were sold commercially were the mercury vapor lamps. After sometime, newer and better lamps started to be available in the market such as metal halide lamps and high-pressure sodium lamps.

How do the HID light bulbs create or produce light?

The HID or High Intensity Discharge light bulbs can produce light when the gas present inside the tube starts to heat up. When the gas becomes heated to the point of evaporation, light is produced. The tube contains tungsten electrodes and as the metal elements begin to heat up, they will strike these electrodes and as a result, light will be created.

HID lights are more or less like the fluorescent lights as they require ballast for the production of heat. Ballast is actually an instrument that is utilized to generate light. If the HID bulbs do not have ballasts then it will not be possible for them to produce lights because the reaction for the production of light will not start if there is an absence of ballast.

Tungsten electrodes: what are they?

Tungsten is actually an element (chemical) that is commonly known for its vigorous physical characteristics and high melting point. You will find this element in many electrical appliances and it is also found in HID lights. The color of tungsten ranges from steel gray to tin white.

What are HID lamps used for?

You may or may not know this but the HID lamps have many applications. These lamps are need in those locations or places that need very bright lights. Some of the examples of the places where the HID lamps are used are roadways, warehouses, sidewalks, parking lots, football fields, stadiums, etc. These lamps are also used in indoor gardening, houses, department stores, etc.

If you ask any vehicle owners about HID lights, they will probably tell you what these lights are because many drivers are aware of the High Intensity Discharge lights. These lights are more or less like the natural day light and this is the main reason why many vehicle owners install these bulbs or lights in their cars. With the HID lights, it will be possible for the drivers to see the road clearly even when the area is dark.

HID Light Bulbs - How Do They Work?

Last Minute Ultrasonic Pest

Sylvania 66250 D2R HID - High Intensity Discharge Lamp, Pack of 1

!±8± Sylvania 66250 D2R HID - High Intensity Discharge Lamp, Pack of 1

Brand : Sylvania | Rate : | Price : $89.52
Post Date : Dec 12, 2011 00:19:18 | Usually ships in 24 hours

Sylvania High Intensity Discharge Lamp is designed to increase the light output to a wide area in front of the vehicle and offers environmentally responsible products. It has a distinctive blue-light of HID lamp which stimulates and reflects paint in road markers and signs. This light helps the vehicle in improving visibility and safety thereby not disturbing the vision of oncoming drivers. It includes long-life lighting system and creates less need for replace and dispose.

• HID lighting is light from a plasma discharge rather than a filament
• HID uses less energy than halogen lighting, while producing 3 times more light
• Light lasts up to 3 times longer than conventional halogen technology
• HID lamps produce 70% more light on the road than traditional lamps and uses less power while producing less heat
• Compatible with existing D2R headlamp optics

Stanley Cup Replicas Reviews

35w Bi-xenon H4 HID Headlights & 55w H1 HID Off-road Lights in my 1997 Jeep Wrangler TJ

!±8± 35w Bi-xenon H4 HID Headlights & 55w H1 HID Off-road Lights in my 1997 Jeep Wrangler TJ

Headlights: -35w Bi-xenon H4 HID kit with glare shields 4300K from VVME.com -Hella E-Code housings with cut-off from Quadratec.com Off-road Lights: -Two Hella Rallye 4000's from Quadratec.com -55w H1 HID kit 4300K from VVME.com Gauge Lights: -V-leds gauge cluster LED's

35w Bi-xenon H4 HID Headlights & 55w H1 HID Off-road Lights in my 1997 Jeep Wrangler TJ

Saving Bag Sealer 3746 Rubbermaid This Instant

GE D2R 4200k HID Replacement Bulb

!±8±GE D2R 4200k HID Replacement Bulb

Brand : GE
Rate :
Price : $63.65
Post Date : Dec 04, 2011 19:57:29
Usually ships in 24 hours

Xenon High Intensity Discharge D2R headlight. Better visibility and illumination. Greater illuminated area on the road. Whiter light compared to halogen headlights to look more like natural daylight. Better durability with excellent vibration and shock resistance.

Promo Logitech G7 Shop For Osprey Daypack Discounted Homelite Chainsaw

Sylvania H13 (9008) SilverStar Ultra High Performance Halogen Headlight - Pack of 2

!±8±Sylvania H13 (9008) SilverStar Ultra High Performance Halogen Headlight - Pack of 2

Brand : Sylvania
Rate :
Price :
Post Date : Dec 01, 2011 08:39:09
Usually ships in 24 hours

Sylvania SilverStar ULTRA is the brightest and whitest light. Up to 50% brighter, up to 40% more downroad visibility and up to 50% more sideroad visibility. SilverStar is the brightest 100% legal halogen-burning cleaner and crisper, with a white-hot intensity that will set you and your machine apart. SilverStar is the Halogen that captures the high performance look of HID, changing your view of the night.

Hypoallergenic Dog Biscuits Free Shipping